dmesg - Intel i7-3930K @4.20GHz wielkiczarny - DDR3-1866 - 4x8GiB
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-wc1 xhci-hcd
usb usb3: SerialNumber: 0000:17:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:17:00.0: xHCI Host Controller
xhci_hcd 0000:17:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-wc1 xhci-hcd
usb usb4: SerialNumber: 0000:17:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01180 irq 41
ata3: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01200 irq 41
ata4: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01280 irq 41
ata5: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01380 irq 41
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:12:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:12:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host7: ahci
scsi host8: ahci
ata7: SATA max UDMA/133 abar m512@0xfbe10000 port 0xfbe10100 irq 59
ata8: SATA max UDMA/133 abar m512@0xfbe10000 port 0xfbe10180 irq 59
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
DMAR: 32bit 0000:00:1a.0 uses non-identity mapping
DMAR: Setting identity map for device 0000:00:1a.0 [0xbcee6000 - 0xbcf10fff]
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf03000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.10.0-wc1 ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
DMAR: 32bit 0000:00:1d.0 uses non-identity mapping
DMAR: Setting identity map for device 0000:00:1d.0 [0xbcee6000 - 0xbcf10fff]
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf02000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
mpt2sas_cm0: MSI-X vectors supported: 16, no of cores: 12, max_msix_vectors: -1
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 60
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 61
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 62
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 63
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 64
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 65
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 66
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 67
mpt2sas_cm0: iomem(0x00000000fb940000), mapped(0xffffbac383b20000), size(65536)
mpt2sas_cm0: ioport(0x000000000000e000), size(256)
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.10.0-wc1 ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
tg3 0000:14:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:74:7e:67
tg3 0000:14:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:14:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:14:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:15:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:74:7e:66
tg3 0000:15:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:15:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:15:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
nvme0n1: p1
nvme1n1: p1
DMAR: 32bit 0000:01:00.0 uses non-identity mapping
mpt2sas_cm0: Allocated physical memory: size(7012 kB)
mpt2sas_cm0: Current Controller Queue Depth(2936),Max Controller Queue Depth(3072)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
mpt2sas_cm0: LSISAS2308: FWVersion(13.00.57.00), ChipRevision(0x05), BiosVersion(07.25.00.00)
mpt2sas_cm0: Protocol=(
Initiator
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
usb 1-3: new high-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: M4-CT512M4SSD1, 040H, max UDMA/100
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
usb 5-1: new high-speed USB device number 2 using ehci-pci
ata1.00: configured for UDMA/100
scsi: waiting for bus probes to complete ...
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 2 ports detected
usb 5-1: New USB device found, idVendor=8087, idProduct=0024
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 6-1: New USB device found, idVendor=8087, idProduct=0024
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 3199.839 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1fb2078f8, max_idle_ns: 440795345095 ns
usb 5-1.2: new full-speed USB device number 3 using ehci-pci
usb 6-1.1: new full-speed USB device number 3 using ehci-pci
usb 5-1.2: New USB device found, idVendor=2433, idProduct=b200
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.2: Product: 690LC
usb 5-1.2: Manufacturer: ASETEK
usb 5-1.2: SerialNumber: CCVI_1.0
usb 6-1.1: New USB device found, idVendor=2516, idProduct=0020
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: Quickfire Rapid i
usb 6-1.1: Manufacturer: CM Storm
random: fast init done
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CM Storm Quickfire Rapid i as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:2516:0020.0001/input/input0
hid-generic 0003:2516:0020.0001: input,hidraw0: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.1/input0
usb 6-1.2: new full-speed USB device number 4 using ehci-pci
hid-generic 0003:2516:0020.0002: hiddev0,hidraw1: USB HID v1.11 Device [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.1/input1
input: CM Storm Quickfire Rapid i as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.2/0003:2516:0020.0003/input/input1
hid-generic 0003:2516:0020.0003: input,hidraw2: USB HID v1.11 Keyboard [CM Storm Quickfire Rapid i] on usb-0000:00:1d.0-1.1/input2
usb 6-1.2: New USB device found, idVendor=1b1c, idProduct=1b30
usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.2: Product: Corsair Vengeance M60 Mouse
usb 6-1.2: Manufacturer: Corsair
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1B1C:1B30.0004/input/input2
hid-generic 0003:1B1C:1B30.0004: input,hidraw3: USB HID v1.11 Mouse [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1d.0-1.2/input0
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1B1C:1B30.0005/input/input3
hid-generic 0003:1B1C:1B30.0005: input,hidraw4: USB HID v1.11 Keyboard [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1d.0-1.2/input1
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1B1C:1B30.0006/input/input4
hid-generic 0003:1B1C:1B30.0006: input,hidraw5: USB HID v1.11 Device [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.3: new full-speed USB device number 5 using ehci-pci
usb 6-1.3: New USB device found, idVendor=08bb, idProduct=2706
usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.3: Product: USB Audio DAC
usb 6-1.3: Manufacturer: Burr-Brown from TI
input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.2/0003:08BB:2706.0007/input/input5
hid-generic 0003:08BB:2706.0007: input,hidraw6: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:1d.0-1.3/input2
usb 6-1.6: new high-speed USB device number 6 using ehci-pci
clocksource: Switched to clocksource tsc
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x00138f0000a00e8f), phys(8)
usb 6-1.6: New USB device found, idVendor=046d, idProduct=082d
usb 6-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 6-1.6: Product: HD Pro Webcam C920
usb 6-1.6: SerialNumber: FC2453FF
usb 6-1.8: new full-speed USB device number 7 using ehci-pci
usb 6-1.8: New USB device found, idVendor=046d, idProduct=c52b
usb 6-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.8: Product: USB Receiver
usb 6-1.8: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/0003:046D:C52B.0008/input/input6
hid-generic 0003:046D:C52B.0008: input,hidraw7: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.1/0003:046D:C52B.0009/input/input7
hid-generic 0003:046D:C52B.0009: input,hiddev0,hidraw8: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input1
hid-generic 0003:046D:C52B.000A: hiddev0,hidraw9: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input2
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
mpt2sas_cm0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA M4-CT512M4SSD1 040H PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x500a0751091dc867)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x00138f0000a00e8f), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221102000000), phy(2), device_name(0x50014ee6591de4f5)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x00138f0000a00e8f), slot(2)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221104000000), phy(4), device_name(0x50014ee002079239)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x00138f0000a00e8f), slot(4)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:0:0: Direct-Access ATA M4-CT512M4SSD1 040H PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:1:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 7f 00 00 08
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 7f 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sda: sda1 sda2 sda3 sda4
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 00 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdd] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3 sdd4
sdc:
sdb: sdb1
sd 1:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Attached SCSI disk
sde: sde1 sde2 sde3 sde4
sd 4:0:0:0: [sde] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 71933231104
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 639041536
NET: Registered protocol family 38
random: crng init done
PM: Starting manual resume from disk
PM: Hibernation image partition 253:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: usr.mount: Unit is bound to inactive unit dev-mapper-wielkiczarny_mirrored\x2d\x2dssd\x2dusr.device. Stopping, too.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
loop: module loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
w83627ehf: Found NCT6776F chip at 0x290
w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
nct6775: probe of nct6775.656 failed with error -16
EXT4-fs (dm-2): re-mounted. Opts: user_xattr
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
[drm] Initialized
input: PC Speaker as /devices/platform/pcspkr/input/input10
EFI Variables Facility v0.08 2004-May-17
snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:04:00.1: Force to non-snoop mode
Error: Driver 'pcspkr' is already registered, aborting...
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input13
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input14
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input15
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:08.0/0000:04:00.1/sound/card0/input16
[drm] amdgpu kernel modesetting enabled.
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from simple
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1002:0x0B36 0xC8).
[drm] register mmio base: 0xFB600000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 10b5:8747 = 8795103/10e
[drm] probing mlw for device 10b5:8747 = 8795103
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
ATOM BIOS: 113
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
amdgpu 0000:04:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:04:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 16480754 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:04:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Failed to setup PCC HW register! Wrong GPIO assigned for VDDC_PCC_GPIO_PINID!
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
amdgpu 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff8e271820b008
amdgpu 0000:04:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff8e271820b018
amdgpu 0000:04:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff8e271820b028
amdgpu 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff8e271820b038
amdgpu 0000:04:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff8e271820b048
amdgpu 0000:04:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff8e271820b058
amdgpu 0000:04:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff8e271820b068
amdgpu 0000:04:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff8e271820b078
amdgpu 0000:04:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff8e271820b088
amdgpu 0000:04:00.0: fence driver on ring 9 use gpu addr 0x0000000100000098, cpu addr 0xffff8e271820b098
amdgpu 0000:04:00.0: fence driver on ring 10 use gpu addr 0x00000001000000a8, cpu addr 0xffff8e271820b0a8
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:04:00.0: fence driver on ring 11 use gpu addr 0x0000000000881e90, cpu addr 0xffffbac38583fe90
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:04:00.0: fence driver on ring 12 use gpu addr 0x00000001000000c8, cpu addr 0xffff8e271820b0c8
amdgpu 0000:04:00.0: fence driver on ring 13 use gpu addr 0x00000001000000d8, cpu addr 0xffff8e271820b0d8
amdgpu 0000:04:00.0: fence driver on ring 14 use gpu addr 0x00000001000000e8, cpu addr 0xffff8e271820b0e8
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
[drm] ring test on 0 succeeded in 16 usecs
[drm] ring test on 1 succeeded in 27 usecs
[drm] ring test on 2 succeeded in 31 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 8 usecs
[drm] ring test on 5 succeeded in 10 usecs
[drm] ring test on 6 succeeded in 11 usecs
[drm] ring test on 7 succeeded in 10 usecs
[drm] ring test on 8 succeeded in 9 usecs
[drm] ring test on 9 succeeded in 5 usecs
[drm] ring test on 10 succeeded in 7 usecs
iTCO_vendor_support: vendor-support=0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
Adding 7811068k swap on /dev/mapper/wielkiczarny_mirrored--ssd-swap_1. Priority:-1 extents:1 across:7811068k SSFS
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: usrquota,grpquota,user_xattr
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: user_xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: usrquota,grpquota,user_xattr
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[671]: Received request to flush runtime journal from PID 1
FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
uvcvideo 6-1.6:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 6-1.6:1.0: Entity type for entity Extension 11 was not initialized!
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
spl: loading out-of-tree module taints kernel.
[drm] ring test on 12 succeeded in 20 usecs
[drm] ring test on 13 succeeded in 5 usecs
[drm] ring test on 14 succeeded in 4 usecs
[drm] VCE initialized successfully.
SPL: Loaded module v0.7.0-rc3_2_g9704820
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
[drm] fb mappable at 0xE0CCB000
[drm] vram apper at 0xE0000000
[drm] size 19660800
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x100
amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:04:00.0 on minor 0
ZFS: Loaded module v0.7.0-rc3_108_g100790a8d, ZFS pool version 5000, ZFS filesystem version 5
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff88cedb40)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
usb 6-1.6: reset high-speed USB device number 6 using ehci-pci
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3199910431 Hz
vboxdrv: Successfully loaded version 5.1.14_Debian (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
tg3 0000:14:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:14:00.0 eth0: Flow control is on for TX and on for RX
tg3 0000:14:00.0 eth0: EEE is enabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
SPL: using hostid 0x00000000
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
SGI XFS with ACLs, security attributes, realtime, no debug enabled
fuse init (API version 7.26)
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
usb 6-1.8: USB disconnect, device number 7
usb 6-1.8: new full-speed USB device number 8 using ehci-pci
usb 6-1.8: New USB device found, idVendor=046d, idProduct=c52b
usb 6-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.8: Product: USB Receiver
usb 6-1.8: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/0003:046D:C52B.000B/input/input18
hid-generic 0003:046D:C52B.000B: input,hidraw7: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.1/0003:046D:C52B.000C/input/input19
hid-generic 0003:046D:C52B.000C: input,hiddev0,hidraw8: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input1
hid-generic 0003:046D:C52B.000D: hiddev0,hidraw9: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input2
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { DevExch }
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 310)
ata2: EH complete